M:DEMOLITION HAMMER[AY-DM-65G]

The AY-DM-65G has a published rated input power of 1650 W. This specification describes the machine's electrical power input and should not be confused with an independently measured impact-energy rating.

The published cylinder diameter is 45 mm. It is a specification associated with the demolition hammer's percussion mechanism, not the diameter of the steel chisel or a drilling-hole capacity.

The AY-DM-65G is listed with a 16 kg capacity specification, identifying its heavy-duty demolition category. For a precise net weight or shipping weight, consult the verified manufacturer documentation.

The machine operates on a 220 V AC, 50 Hz electrical supply. It is a corded electric demolition hammer and requires a compatible, properly protected electrical connection.

Yes. It can be used to break suitable thick cement screed, old tile-bedding mortar and deteriorated hard floor layers during renovation. The method and chisel must be appropriate for the material and underlying structure.

The AY-DM-65G can be used for removing suitable old concrete steps, cement thresholds and designated entrance structures during rebuilding. Supporting or load-bearing elements should not be demolished without professional assessment.

It can be used to dismantle suitable non-structural cement-and-masonry fixtures, including unwanted fixed counters and platforms. Before starting, check for hidden electrical wiring, water pipes and structural connections.

Yes. The machine is relevant to suitable concrete and masonry removal tasks involved in modifying workshop service areas, utility spaces and commercial premises. Work should be carried out in a properly isolated area.

The AY-DM-65G has a rear D-shaped operating handle and a curved auxiliary handle mounted around its front housing. Operators should hold the designated grips as instructed by the manufacturer and should not grip the percussion barrel.

Both models share published specifications of 1650 W input power, 45 mm cylinder diameter and 16 kg capacity. Their exterior designs and front housing arrangements differ. The AY-DM-65G has its own distinctive yellow percussion housing and body design. The shared specifications do not, by themselves, establish a performance advantage for either model.

Wear suitable eye, hearing, respiratory, hand and foot protection. Inspect the power cable and chisel, verify that the work surface is safe to demolish, and maintain proper control using the designated handles. Follow the official operating manual and assess structural and hidden-service hazards before breaking.